BEST Reports Improved In-Field Critical Current Performance of its Second Generation High-Temperature Superconductor YBCO Tapes

Bruker Energy & Supercon Technologies, Inc. (BEST) today reported in-field high magnetic field test results for its second-generation (2G) high temperature superconductor (HTS) tape, demonstrating enhanced performance as a result of improvements to its proprietary manufacturing technology.

Recently, the 2G HTS coated conductors (YBCO material) produced by BEST have achieved a new record critical current of 1,925 Amperes (A) in a 4 millimeter (mm) wide tape tested at a temperature of 4.2 Kelvin (K) in an 18 Tesla (T) magnetic field parallel to the tape surface. This current corresponds to 4,810 A per cm-width and a superconductor current density of 27 MA/cm². With a perpendicular field orientation, the critical current reached 1,000 A in a 7 T magnetic field, and 732 A in a 10 T field. These critical current test results were verified in collaboration with the high magnetic field test laboratory at the Karlsruhe Institute of Technology (KIT), Germany.

Dr. Alexander Usoskin, R&D Manager for 2G HTS materials and superconducting fault current limiters (SFCL) at BEST, commented: "We believe these new critical current test values are more than twice the highest critical currents previously observed in 4 mm wide HTS coated conductors in such magnetic fields. The results were obtained from 5 to 10 meter long tapes that we consider to be representative samples of our large scale YBCO manufacturing process. With our new proprietary deposition technique based on multi-beam pulsed laser deposition, the manufacturing of such ‘high-field’ HTS tapes is now feasible, and we also expect these processes to be more robust for increasing processing yields.”

Dr. Klaus Schlenga, Chief Technology Officer at BEST, commented: "These in-field critical current test results are especially impressive since the high current capacity is accompanied by high intrinsic mechanical tape strength, without the need for any additional reinforcement, for example with steel tapes. Significantly improved in-field performance should positively influence high magnetic field applications that are tightly linked to the technical critical current density of the YBCO superconductor, such as superconducting dipole magnets, Nuclear Magnetic Resonance (NMR) ultra-high field superconducting magnets, and other new superconducting magnet designs in energy research.”

Professor Dr. Mathias Noe, Director of the Institute for Technical Physics of the Karlsruhe Institute for Technology (KIT), added: "We are glad to confirm the measured data with BEST HTS tapes. Our HOMER high field test facility allows high resolution measurements of critical currents in a fully superconducting magnet up to 20 T, and our plans are to go for even higher fields in the future with HTS tapes. The measured tapes are particularly strong candidates for such a high field insert. These improved critical current test results are another highlight in our long-lasting partnership with BEST in various fields of applied superconductivity.”

About Bruker Energy & Supercon Technologies

Bruker Energy & Supercon Technologies, Inc. (BEST) is a subsidiary of Bruker Corporation (NASDAQ: BRKR). BEST is a world-leading supplier of superconductors as well as superconducting components and devices for alternative energy, smart grid, ‘big science’, industrial and healthcare applications. The product range encompasses a broad portfolio of high performance superconductors, superconducting magnets and devices for industrial and research applications, as well as accelerator technologies, including turn-key systems. For more information on BEST, please visit: www.bruker-est.com.

Cautionary Statement of Bruker Corporation

Any statements contained in this presentation that do not describe historical facts may constitute forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. Any forward-looking statements contained herein are based on current expectations, but are subject to risks and uncertainties that could cause actual results to differ materially from those projected, including, but not limited to, changing technologies, product development and market acceptance of our products, the cost and pricing of our products, manufacturing, competition, dependence on collaborative partners and key suppliers, capital spending and government funding policies, intellectual property rights and other risk factors discussed from time to time in Bruker Corporation’s filings with the Securities and Exchange Commission. These and other factors are identified and described in more detail in our filings with the SEC, including, without limitation, our annual report on Form 10-K for the year ended December 31, 2009, most recent quarterly reports on Form 10-Q and current reports on Form 8-K. We expressly disclaim any intent or obligation to update these forward-looking statements other than as required by law.